← FOTOFLEX FLEXLAB CASE STUDY

FLEXLAB PROJECT – LIVE PRODUCTION ENGINEERING

A DIY REMOTE SHUTTER CONTROLLER FOR SONY CAMERAS

Built overnight. Ready for the grand final.

The shutter controller being built: an Arduino Uno wired to an actuator on a Sony camera, with a hand holding the remote button

During the Manhunt International Grand Final, we mounted a Sony camera high above the LED screen. We needed a reliable way to start and stop video recording without physically accessing the camera.

Although Sony's wireless camera mobile application offered remote control, we didn't want to depend on a wireless connection throughout a major international event. If the connection failed, we could lose the ability to control recording.

So we built our own solution.

Using an Arduino Uno board and a simple stepper motor, we developed a mechanical shutter button actuator that could physically press the camera's recording button.

The controller allowed us to operate the camera from the ground without climbing up to the camera position.

The interesting part? We designed and built this entire DIY solution the night before the grand final.

A practical engineering solution, developed under real production pressure.

HARDWARE & COMPONENTS

  1. 01Arduino Uno
  2. 02Stepper Motor
  3. 03Custom Mechanical Button Actuator
  4. 04Sony Camera
  5. 05DIY Remote Control Mechanism
High-angle shot of the Manhunt International grand final stage, recorded by the remotely triggered camera
THE RESULT / The top shot of the grand final, recorded by the camera above the LED screen.
Two crew members on the truss above the LED screen, mounting the camera
THE MOUNT / Fixing the camera to the truss above the LED screen.
PREVIOUS EXPERIMENTDIY Quadcopter – Our First Drone Experiment